Stair Company Hamptons – With Exactly What Agreement Is It Best To Make A Decision..

If you are buying a stair with balusters in a contrasting material, including painted balusters on an oak stair, questions will more than likely arise regarding the finishing of the stair. “Should my painter finish the balusters separately from the stair, then have the balusters fitted when the stair is completed?

Below are a few things to consider with Stair Company Suffolk County: Your painter will normally choose painting the balusters before installation. This allows them to be sprayed instead of brushed and eliminates plenty of “cut-in” work.

Painting balusters separately does mean the stair installers must return to the website, take away the railings and install the balusters. You will see charge with this “second trip” to the jobsite. You should remember to schedule this “second trip” in coordination using the completing the finish.

Leaving your balusters out for painting implies that they are more inclined to be lost or stolen during this time. You will be responsible for balusters left at the jobsite. Once the painted balusters are finally installed, you will have additional “touch-up finishing required in the rail joints. Holes will need to be filled and stain and complete re-requested the ultimate finish.

Plan installation of your hardwood stair for after your drywall has been taped, sanded, and primed. The drywall process can affect the stair. Drywall mud and paint overspray will make the stair finishing process very difficult and may even make desired results impossible to attain.

Most hardwoods are a wide open grain wood and once dirt gets embedded in open grain it is very difficult to remove, despite having sanding. This will possess a negative effect on the appearance and texture in the finish. Care should also be used to guard the stair from dirt and mud.

Never Cover Hardwood Stairs With Plastic. Plastic fails to allow airflow, trapping moisture underneath and creating the wood to grow and contract. This expansion and contraction causes the wood joints to open up and might cause the wood to break into.

The environmental conditions inside the house are critical to the caliber of the stair. Hardwood lumber has become dried via a very controlled process with an industry standard moisture content of 6 – 8%. This matches the moisture content vcbxbf the average home and allows the wood to stay stable under normal conditions.

In cold climates, each time a house is heated to your high temperature during winter, the air may become very dry, creating the wood to shrink. This shrinkage can make cracks visible within the wood and joints may begin to open up. Subjecting a stair to high levels of heat is like putting it within an oven and can accelerate the deterioration in the stair.

All hardwoods must be sealed on all sides to retard movement and protect from being exposed to elements and damage. It is recommended to seal wood immediately.

Leave a Reply

Your email address will not be published. Required fields are marked *